Interior doors
PORTA RESIST

Notifications

DOOR LEAF CONSTRUCTION

Honeycomb or hollow chipboard core (at an extra charge) reinforced with rails and stiles. Models 1.4, 1.7 - chipboard core, 4.B - hollow chipboard core. The construction is skinned with HDF. lipping ABS tape on the side edges. Inlays - black or silver, 6 mm wide. 4.A and 4.B models come with 8 mm thick, laminated safety glass, which is an element of the construction.

ACCESSORIES INCLUDED IN THE DOOR LEAF PRICE

• Rebated doors: two or three standard barrel hinges or PRIME hinges; non-rebated: two 3D hinges
• Lock: key lock, WC lock, or cylinder lock
• Glazing - models of gr. 1 and 7 ‘chinchilla’ glass; frosted tempered glass; transparent glass. Models of gr. 4 - 8 mm thick
• Round pull handle (for sliding doors)

DOOR FRAMES

Recommended rebated door frames:

• PORTA SYSTEM
• MINIMAX
• STEEL

Recommended non-rebated door frames:

• PORTA SYSTEM ELEGANCE
• PORTA SYSTEM ELEGANCE 90 degrees

NOTES

• Norm PN EN 14351-2:2018-12
• The door leaf is skinned with a Gladstone/Halifax board (with structure), a door frame is finished with matching CPL veneer 0,2 mm
• Ventilation grille, ventilation sleeves and preparation for shortening are not available for group 4
• Chipboard core have preparation for shortening as a standard
• Size ‘100’ and ‘110’ is not available for models 1.4, 7.4
• Size ‘110’ is available only with hollow chipboard. Glazing size is the same as for size ‚‘100’
• Size ‘110’ is not available for models of gr. 4
• Fixed size of glass, model 4.A
• Black glazing is available for model 4.A (optionally at extra charge)
• Magnetic lock is not available for a double door
• Double doors are available in any door leaf size combinations
• For non-rebated double door, ‚active’ and ‚passive’ door leaves must be ordered
• Size ‘80’ and ‘90’ in investment norm (clear opening width 800, 900 mm) available as a standard (applies to gr. 1 and 7) - without extra charge
• Reinforcement for a door closer requires third hinge
• Investment set is available only with hollow or chipboard core
• Investment set is available with a rebated door frame: PORTA SYSTEM, Steel PORTA SYSTEM, Steel adjustable, Corner profile - SMALL and LARGE
• Sizes ‚100’ and ‚110’ reguire third hinge
• PRIME or 3D hinges - packed with a door frame
• Thanks to TechnoPORTA AQUA STOP technology door leaves finished with CPL HQ have lower edges protected against humidity

EXTRA CHARGES

• size ‘100’ and ‘110’
• hollow chipboard core
• black glass panel – model 4.A
• inversion of the glass
• chipboard core
• investment set (extra charge added to a door leaf )
• investment set (extra charge added to a door frame)
• OFFER - PRIME set
• gold 3D hinges (extra charge added to door frame price)
• third 3D hinge - silver, white, black (extra charge added to door frame price)
• third 3D hinge - gold (extra charge added to door frame price)
• ventilation grille (only group 1 and 7), ventilation sleeves or ventilation undercut
• magnetic lock with stainless steel faceplate
• magnetic lock: white, black (for non-rebated doors)
• black lock and black barrel hinges
• preparation for shortening (maximum 60 mm) (apart from gr. 4)
• reinforcement for door closer (third hinge is required)
• stainless steel porthole (model 1.1, 7.1)
• black porthole
• automatic threshold seal
• hook lock with side pull handles (sliding doors)
• oblong pull handle for sliding doors
• caps for standard hinges
• handle with an escutcheon